Track

PLASTERS

PVC Gypsum Cornerbeat

PVC corner or corner guard resistant to weathering and alkalis, with great durability and lateral holes. Guarantees fixing to the substrate for the finishing of plaster and mortar, allowing a perfect finish in the corner.

Third header
Length 2.50 m
Boxes 100 pcs.
Boxes 250.00 ml
Pallet 48 boxes

Fine Point Butt-Pad

PVC corner piece. This is a special concealed track for use in thick-bed mortar coatings.

 

Third header
Length 2.50 m
Boxes 50 pc.
Boxes 125.00 ml
Pallet 48 boxes

PVC Monolayer Cornerbeat

PVC corner or corner guard resistant to weathering and alkalis, with great durability and lateral holes. Guarantees fixing to the substrate for the finishing of plaster and mortar, allowing a perfect finish in the corner.

Third header
Length 2.50 m
Boxes 50 pc.
Boxes 125.00 ml
Pallet 48 boxes

Single-layer reed

Flexible and resistant trapezoidal PVC bead for single-layer mortar and facade mortar. Ready to form joints and patterns. Trapezoidal shape: larger base 200 mm, smaller base 16 mm, thickness 7 mm.

Third header
Length 2.00 m
Boxes 125 pc.
Boxes 260.00 ml
Pallet 60 boxes

Galvanised Monolayer Glass Guard

Galvanised steel corner track with white PVC. It is used in mortar and single-layer mortar finishes on façades. Resistant to deformations, it allows the correct alignment of the corners of façades and cornice beats.

Third header
Length 2.50 m
Boxes 50 pc.
Boxes 125.00 ml
Pallet 48 boxes

PVC strip

PVC strip. This is a special profile that allows sharp edges to be made in thick-bed mortar coatings. 



Third header
Length 3.00 m
Boxes 25 pc.
Boxes 75.00 ml
Pallet 30 boxes

SATE

Starter Track

Starting track made of 0.7 mm thick aluminium, it is placed horizontally at the lower limit of the area to be clad, facilitating the starting of the system assembly and guaranteeing its horizontality. It includes a dripper that guarantees water drainage. Insulation available up to 200 mm.
Insulation: 40 - 60 - 80

Third header
Length 2.50 m
Boxes 20 pcs.
Boxes 50.00 ml
Pallet 800 pc.
Pallet 2000 ml.
Isolation 40 mm

Side Track

Lateral closing track made of 0.8 mm thick aluminium, it is placed on the vertical limits of the area to be clad, facilitating the closing of the system.

Insulation up to 200 mm available. 

Insulation: 40 - 60 - 80

Third header
Length 2.50 m
Boxes 10 pc.
Boxes 25.00 ml
Pallet 800 pc.
Pallet 2000 ml.
Isolation 40 mm - 100 mm

Corner with Mesh 8x12

PVC cornerbeats with alkali-resistant fibreglass mesh and ETAG 004 certified, valid for any mortar thickness, protects horizontal and vertical corners on cornerbeats, windows and doors, helping to form perfect cornerbeats, both aligned and perpendicular.

Third header
Length 2.50 m
Boxes 50 pc.
Boxes 125.00 ml
Pallet 2000 pc.
Pallet 5000 ml.
Material PVC and PV

Goteron PVC Track

Exposed PVC drip track with alkali-resistant and ETAG 004 certified fibreglass mesh. It is used in the final plastering of door and window lintels in order to prevent run-off at changes of plane, preventing the return and filtration of water into the interior of the wall.

Third header
Length 2.50 m
Boxes 20 pcs.
Boxes 50.00 ml
Pallet 800 pc.
Pallet 2000 ml.

Expansion Joint Track

PVC expansion joint track with alkali-resistant and ETAG 004 certified fibreglass mesh. It is used for expansion joints from 5 to 25 mm. wide, both vertical flat and internal corners of the façade. They are waterproof and UV-resistant and are used to ensure adequate expansion in the absorption of settlement movements.

Third header
Length 2.50 m
Boxes 25 pc.
Boxes 62.50 ml
Pallet 750 pc.
Pallet 1875 ml.

Coronation Track

Crowning track made of 1.0 mm thick aluminium, it is placed at the upper ends of the area to be clad with a flange of no less than 4 cm. above the thickness of the insulation, facilitating the closure of the system. Its cornerbeat includes a drip cornerbeat that guarantees vertical drainage of the water, preventing its return and filtration to the interior.

Third header
Length 2.50 m
Boxes 10 pc.
Boxes 25.00 ml
Pallet 320 pc.
Isolation 40 mm - 100 mm

Mounting Set

Exposed PVC drip track with alkali-resistant and ETAG 004 certified fibreglass mesh. It is used in the final plastering of door and window lintels in order to prevent run-off at changes of plane, preventing the return and filtration of water into the interior of the wall.

Mechanical Fixing Plug LTX 10

Mechanical tapping dowels with polyamide nails and a short embedding depth for fixing the insulation materials: EPS and XPS.
PRODUCT CODE DIAMETER AND LENGTH (mm) BOXES (pcs.)
LTX-70 fixing dowel 10x70 200
LTX-90 fixing block 10x90 200
LTX-110 fixing block 10x110 200
LTX-120 fixing block 10x120 200
LTX-140 fixing block 10x140 200
LTX-160 fixing block 10x160 200
LTX-180 fixing block 10x180 200
LTX-200 fixing block 10x200 200
LTX-220 fixing block 10x220 100
LTX-260 fixing block 10x260 100

What are you looking for?

If you need more information about our products or services, please do not hesitate to contact us.